JC2 Preamp - USED

• 6 pairs unbalanced RCA line-level audio input jacks
• 2 input pairs can be switched to XLR balanced connectors
• Independent balanced/unbalanced select for the L & R channel
• Each channel's input is switched by its own gold-on-silver contact relay
• 4 output jack pairs with specialized functions:
  1 Main output jack pair is balanced XLR, polarity is switched by remote
  1 Main output jack pair is unbalanced RCA, polarity is switched by remote
  1 output jack pair is unbalanced RCA, inverted polarity only
  1 output pair is unbalanced RCA, normal polarity, fixed level for recorders
• Dual-mono left & right channel circuit boards minimize crosstalk
• Hand-matched complementary FETs
• Direct DC servo-coupled, no capacitors in the signal path
• Premium 4-gang motor-driven analog master volume control
• Separate TKD brand analog gain controls for L & R channel
• 3/8" thick aluminum shielding around audio boards
• Shielding prevents noise from power supplies & control circuits
• Separate output jacks for simultaneous normal & non-inverting polarity
• Aluminum chassis rear panel
• Remote control polarity switching uses gold-on-silver contact relays
• Vampire brand 24k gold-plated RCA jacks
• Neutrik brand premium XLR connectors
• Canare brand internal wiring
• High capacity R-core audio power transformer & inductor
• Hyper-fast soft recovery audio bridge rectifiers diodes
• Independent power supply for controller, relay coils, triggers, LEDs
• Remote control handset controls all functions
• Discrete IR codes for remote control
• Four 12v trigger output jacks for power amp auto turn-on:
  Two 12v trigger jacks are switched by the remote handset
  Two 12v trigger jacks are live when the JC 2 is turned on
• Two-way RS-232 serial port connection
• Line level inputs only; no inputs for phono
• Audio mute is switched by independent L & R relays
• Rear panel IR repeater input & loop out jacks
• Premium detachable heavy gauge IEC AC cord
• 2 6' (2m) trigger wires included
• Remote handset also controls Parasound Halo T 3 Tuner
• 3u Chassis, rack mountable with HRA3 (sold separately)

Frequency Response
5 Hz - 100 kHz, +0/-3 dB

Distortion
THD: < 0.003% at 100 Hz
THD: < 0.005% at 20 kHz
IM: < 0.003%

S/N Ratio
> 116 dB, input shorted, IHF A-weighted
> 104 dB, input shorted, unweighted

Crosstalk
> 100 dB at 10 kHz
> 90 dB at 20 kHz

Gain
14 dB, maximum

L, R Gain Control Range
- 10 dB

Input Impedance
Unbalanced: 30k ohms
Balanced: 30k ohms per leg

Output Impedance
Unbalanced: < 60 ohms
Balanced: < 60 ohms per leg

Input Sensitivity
200 mV for 1 V output
Total Gain: 14 dB
Maximum Output: 8 V

XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

AC Power Requirement
110 - 120 V or 220-240 V, 50 - 60 Hzs
(Set AC Voltage switch on rear panel)
25 watt standby; 30 watts when turned on

Dimensions
Width: 17 1/4" (437 mm)
Depth: 16" (406 mm)
Height, with feet: 5 7/8" (150 mm)
Height, without feet: 5 1/4" (133 mm)

Weight
Net: 24 lbs. (11 kg)
Shipping: 36 lbs. (16.4 kg)

Used Components Rating Key:

    •    Excellent: New in box (10/10).
    •    Very good: Perfect front face, 1 minor flaw on body is acceptable (8-9/10).
    •    Good:1 or 2 minor flaws, used but well maintained (6-7/10).
    •    Fair:3 or 4 minor flaws, or 1 major scratch, appears used (5/10).

USED PRODUCT WARRANTIES:
In addition to any warranties from manufacturers, all products including used products purchased from our company will be repaired or replaced at our option should they malfunction under normal use within one year of purchase. Please contact us for an RMA number (Return Merchandise Authorization) prior to sending anything to The Cable Company or the manufacturer.

USED PRODUCTS EXCHANGE POLICY:
Unhappy with the purchase? We offer a 30 day full value exchange for used product purchases. The full final purchase price of the merchandise (not including freight) will be applied to any purchase new or used products of equal or greater value. The customer is responsible for all shipping costs for returns.