Takshaka Digital Clock Cable (50 Ohm)

In any digital audio system that uses a master clock, timing accuracy is everything. The clock signal is the reference that keeps every digital component synchronized. If that signal arrives distorted, noisy, or unstable, the entire system suffers.

The Takshaka 50Ω Digital Clock Cable is designed to deliver that timing signal with absolute stability. Built using the same design philosophy behind the Takshaka cable series, this cable preserves the integrity of the clock waveform from the source device to the receiving component.

Unlike S/PDIF or AES digital cables, which carry encoded audio data, a word clock cable carries a dedicated square-wave timing signal used to synchronize multiple digital components. Because of this, maintaining the correct impedance and preserving clean signal edges becomes critical.

The Takshaka clock cable is built as a true 50-ohm transmission line, allowing the clock signal to propagate cleanly with minimal reflections and excellent edge integrity. The result is a more stable reference clock and more reliable synchronization between digital devices.

At the center of the cable is a high-purity silver conductor chosen for its superior conductivity and extremely low signal loss. Silver allows the clock waveform to travel with greater precision, preserving the sharp rise times required for accurate timing signals.

The cable also incorporates Snake River Audio’s Hanging Faraday™ shielding system, which protects the clock signal from external electromagnetic interference without imposing the sonic penalties that can occur with traditional shield grounding methods. By isolating the shield from the signal return path, the clock waveform remains clean and stable across the entire cable length.

The Takshaka Digital Clock Cable is terminated with precision BNC connectors, the standard used in professional clock distribution systems. BNC connectors maintain the correct 50-ohm impedance geometry from end to end, minimizing reflections and preserving waveform accuracy.

Because word clock cables carry a dedicated timing reference rather than encoded audio data, these lengths allow flexibility in system layout while maintaining excellent signal integrity.

For systems that rely on external clock synchronization, the Takshaka Digital Clock Cable ensures that the reference signal arrives exactly as intended—clean, stable, and precisely timed.

Hanging Faraday™ Shielding
Many conventional shielded cable designs tie the shield into the signal circuit at both ends. While common, that approach can raise return-side capacitance and alter impedance behavior.

This can be compared to walking down the sidewalk to the store, then having to slog through a swamp on the way home. The trips are not equal. The path is imbalanced. That imbalance can create problems.

Snake River Audio's Hanging Faraday™ instead isolates the shield electrically while still enclosing the conductors, functioning like a Faraday cage that blocks external interference without loading the transmission path.