We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
M3X2 Isolation Base Series
by
HRS
$3,330.00
Heavy Product
This product will require additional shipping. The extra shipping will be calculated after you place your order. If you need the shipping cost prior to placing an order please contact our Audio Experts.
HRS optimizes tuning for specific components. Please add a comment at checkout specifying brand and model of component!
M3X2 Isolation Base
"The M3X2 Isolation Base is a no compromise product. It is designed to allow your audio system to achieve it's full potential so you can completely enjoy the presentation of your favorite performances. It is built with carefully selected materials, using exceptionally high manufacturing standards; so it will always look and perform as perfectly as the day it left our factory."
-Michael Latvis, Chief Engineer
The M3X2 Isolation Base is the latest generation of reference level Isolation Bases from Harmonic Resolution Systems. The result of more than a decade of research and development into achieving true reference level audio system performance. The M3X2 is manufactured from 70+ parts and six different materials; including two proprietary polymers, billet machined aircraft aluminum housing, and polished black granite.
This unique design utilizes six different materials to optimize stiffness, geometry, mass, energy dissipation, and mechanical impedance characteristics. Each material is carefully selected for optimum performance and functionality. The M3X2 Isolation Base also uses four different proprietary HRS materials. The first two are located inside the frame to prevent and eliminate internal noise. The third and fourth proprietary materials are used externally in the footer of the base to optimize performance for different component types or environments.
A finely polished black granite contact plate is combined with the two custom resonance control stages inside the billet machined aircraft aluminum frame. The external visual surfaces of the frame have a craftsmanship finish and special HRS black anodize coating. This exceptional design was created to offer maximum performance, cosmetic elegance, and a very durable scratch-resistant inlay design that will provide years of maintenance-free service. The low profile (3-inch high) design also minimizes space requirements and keeps the visual focus of your system on the components you have selected.
The M3X2 Isolation Base is produced in six standard sizes and is also available in custom sizes to suit every component in the world. Each size can be purchased with any of our different footer options to optimize performance for all components.
- Broadband noise-reduction systems maximizes performance
- Highly effective on a wide range of surfaces and structures
- Low-profile compact design minimizes space requirements
- Standard and custom sizes ensure full system integration
- Can be used on any existing surface
- Integrates directly into HRS audio stands without modification
- Custom model available for every audio component in the world
- Easily modified to optimize performance for different component types
Every HRS Isolation Base model series can be set to either transfer and dissipate energy coming to and from the component or isolate the component from the supporting structure. Each HRS Isolation Base includes either our Broad-Band Isolation Feet (SF2 & SF3), our Extended Low Frequency Feet (LF2 & LF3), or our Bi-Directional Noise Reduction Feet (G7). The selection of the footer type is made to optimize the performance of each component. You can also adjust or change the footer type on each isolation base at anytime to keep your system at peak performance. Please consult your local sales representative or HRS to make final footer selection to optimize performance of your system.
SF2 / SF3: HRS Broadband Isolation Feet – Isolates components from below 20 Hz to above 40k Hz. Excellent starting point for tube amplifiers, tube pre-amplifiers, DAC’s, phono pre-amps, and many turntables. Select proper component range from chart below. For large amplifiers and turntables, please contact HRS for custom settings.
LF2 / LF3: HRS Low Frequency Feet – Isolates component from below 10 Hz to above 40k Hz. Use for non-suspended turntables and when subsonic content is present and presents a potential feedback issue with the system. Also used for custom applications where they provide sonic benefit. Custom setup required for each component.
G7: HRS Bi-Directional Noise Reduction Feet – Transfers and dissipates energy coming to and from the component. Used for solid-state power supplies, power conditioners, tape machines, vacuum pumps, solid state amplifiers, and solid state pre-amplifiers. These can also be used if you prefer to not deal with different load ranges or where the use of chassis noise reduction products is not desired or possible. The HRS G7 feet do not have any load limit and can be used for any component.
G-Links are optional Stainless Steel spikes designed to turn your M3X2 into an amp stand. Suitable for all HRS platforms, but solely to be used with their G7 Bi-Directional Noise Reduction Feet, G-Links act as the ideal interface between the platform and any floor material.
G-Links are intended for use where you do not already have an HRS frame system. G-Links ensure excellent coupling of the G7 equipped HRS Isolation Base to a carpeted surface or an uneven floor. If G-Links are used on a hard surface (e.g. Wood, Stone, Bamboo etc), then Floor Protectors are recommended to preserve the surface.
Image below shows the intended use case, a set of four underneath HRS G7 feet. (Platform and G7 feet not included, Floor Protectors optional).
NOTE: HRS does not recommend the use of G-Links under any of their other footers (i.e. SF2, SF3 or LF feet).
Congrats, this product is FREQUENT FLYER ELIGIBLE
If you're interested in more products that are Frequent Flyer Eligible just look for this icon or use the SAVINGS filter when searching for products.
Our "Frequent Flyer" Program offers pricing and/or freight incentives for any order over $100 domestically ($300 internationally). Frequent Flyer is a cumulative program, so you will get credit for all previous orders each time to place a new order! With us, everyone’s a Frequent Flyer - no prior signup needed. After you place an order for Frequent Flyer eligible products, we will calculate applicable incentives. Your order amount will be adjusted and we will confirm the calculations by email within one business day. Click for more details.
| When your order totals (including current transaction) are: | Incentive (Except for Used or Specials) |
|---|---|
| $0 - 49 | 0% Discount. Customer pays freight guidelines |
| $50 - 199 | 0% Discount. See free freight guidelines |
| $200 - 599 | 5% Discount. See free freight guidelines |
| $600 - 699 | 6% Discount. See free freight guidelines |
| $700 - 799 | 7% Discount. See free freight guidelines |
| $800 - 999 | 8% discount. See free freight guidelines |
| $1000 - 1499 | 9% discount. See free freight guidelines |
| $1500 - 1999 | 10% discount. See free freight guidelines |
| $2000 - 2499 | 11% discount. See free freight guidelines |
| Over $2500 | 11.5% discount. See free freight guidelines |