MiG SRX Speaker Footers

MiG SRX Speaker Footers
The Speaker Has Never Been the Problem. The Interface Has.

Your speaker is engineered to convert an electrical signal into acoustic energy with precision. But the moment it makes contact with the floor, that precision is compromised. Mechanical energy flows back into the cabinet. The floor couples to the speaker. Resonance contaminates the field. The image collapses at the edges. The low end loses definition. Traditional spikes attempt to drain this energy. They don’t control it. The SRX Speaker Footer does something fundamentally different.

The Architecture
The SRX Speaker Footer applies the full MiG SRX technology stack to the most mechanically demanding interface in your system - the point where your speaker meets the floor.

A precision CNC-machined chassis combines machine aluminum, stainless steel, carbon fiber, and carbon tungsten - differential materials selected specifically for their distinct vibration propagation characteristics. This is not an aesthetic choice. Each material handles a different frequency range of mechanical energy. Together they form a resonance management architecture, not a passive spike.

The adjustable stainless steel spike point allows precise leveling of your speaker on any surface - carpet, hardwood, stone - without compromising the mechanical coupling interface.

Four Footers. Two Distinct Roles.
Most speakers ship with four contact points. The SRX Speaker Footer system is engineered around that reality - with a specific metamaterial strategy assigned to each position.

• Three of the four footers carry a hybrid UEF Metamaterial formulation that addresses the full performance spectrum simultaneously - holographic realism and soundstage density, low-frequency impact and structural drive, envelopment and warmth, and midrange liquidity.
• Each of these three footers does everything at once. No compromises. No tradeoffs.
• The fourth footer is different, singularly voiced for one purpose - to lock the center image. It is positioned at the rear inside corner of each speaker - the corner geometrically closest to center stage. On the right speaker, it occupies the rear right position. On the left speaker, the rear left. From both sides of the soundstage, this footer anchors the phantom center from its optimal position. Footer Four is not interchangeable. Position matters. The metamaterial and the geometry work together. The result is a center image that doesn’t drift, doesn’t smear, and doesn’t collapse at volume. It locks.

Field Integration - Tuned to the Same Frequency
The SRX Speaker Footer is voiced to operate in synergy with the full Synergistic Research ecosystem - FEQ Carbon, LOGIQ, and the MiG SRX footers under your components. The UEF Metamaterials are tuned to track the same ultra-low-frequency bias used across the SR product line.

This turns your speaker’s mechanical footprint into an intentional part of your system’s overall field architecture - rather than an unmanaged source of vibration and resonance contamination.

Thread Compatibility
Every MiG SRX Speaker Footer ships with your choice of thread adapter to ensure a precise, secure fit with your loudspeakers. Whether your speakers use ½”-13, ¼-20, M8x1.25, M6x1 mounting points, Synergistic Research provides the correct hardware at time of order. Synergistic also has YG adapters that are M10x1.25 x 8mm long.

Speakers with three-point mounting systems can be accommodated by purchasing individual footers rather than a full set of four.

• Custom thread options are available upon request for speakers with proprietary mounting systems.

From Lead Designer Ted Denney
“Every other footer on the market treats the speaker-to-floor interface as an isolation problem. I treat it as a field management solution. The SRX Speaker Footer doesn’t isolate. It governs. Three footers handle everything simultaneously — slam, midrange liquidity, warmth, holography - because the hybrid metamaterial formulation doesn’t force you to choose. The fourth footer does one thing. It locks the center. Position it correctly and the image stops moving. That’s not a feature. That’s engineering.”

• Four footers recommended per speaker - eight per pair

• Materials:  Machine aluminum, stainless steel, carbon fiber, carbon tungsten, UEF Metamaterials

• Spike:  Adjustable stainless steel

• Available thread adapters:

  • ¼-20

  • M6x1

  • M8x1.25

  • ½”-13

  • YG M10x1.25 x 8mm (for YG Speakers)

Custom thread options are available upon request for speakers with proprietary mounting systems.