Gold Eclipse 10 Biwire Jumpers (Set of 4)

The Gold Eclipse 10 biwire jumper cables provide superior fidelity adapting standard 2-terminal speaker cables to speakers with 4-terminal biwired inputs. Grain Optimized solid silver conductors provide the best sound when the arrows point in the direction the signal flows. For the best preservation of delicate musical information, we recommend connecting speaker cables directly to the high frequency terminals and using the jumpers to connect the low frequency terminals. The jumper arrows should also point to the low frequency terminals. Pack of 4 biwire jumpers with Banana plug or Spade lug terminations. Jumpers are six inches (6") in length.

DESIGN 
Quad DNA HELIX®

SIGNAL CONDUCTORS 
Qty: 4 (32 strand groups)    Gauge: 15AWG |  1.6 sq. mm

CONDUCTOR MATERIAL 
Solid Silver

INSULATION 
COMPOSILEX® 5

PLUG CONTACTS
Silver-Clad OFC Uni-Term

Wireworld speaker cables are simply too large to be used as bi-wire jumpers, they can't be easily bent and won't make tight turns, especially at such short lengths. Wireworld's solution is to use their interconnect cable from the same series to make their jumpers. With similar geometries and identical metallurgies, this is an ingenious solution to improve flexibility while retaining a high level of performance.  Gauge is effectively doubled from what's listed for the appropriate RCA interconnect because all the conductors in the cable are used for each leg of the jumper. This delivers plenty of power, matching sound quality and greater flexibility!