FrontRow Reserve PowerChord

The Reserve cables are built upon the already successful frontRow line. The Reserve cables and powerChords include a judicial amount of silver conductors in addition to the already proven copper geometry of the existing frontRow. Reserve cables and powerChords also include an advanced formulation of natural crystals optimized for protection against EMI/RFI as well as the addition of EMI/RFI sleeving. Further, in the powerChords, a more extensive grounding and shielding scheme has been developed. All this adds up to a significantly lower noise floor with increased resolution and dynamics. The Reserve shed more illumination on the musical event, especially from the lower mids on up. They offer a more immediate and engaging, view into the performance. They are more fleshed out and resolute, especially at the lower end of the spectrum. Like every previous advancement in Audience cables, the frontRow Reserve convey a greater reproduction of recorded music.

The frontRow powerChord’s individual internal conductors are comprised of all new, modified 99.9999% pure Continuous Cast Copper, 38 strand, 6 bundle, 14 gauge wires. Configured to frontRow specifications, these wires are combined and laid out in a specific geometry and spacing, providing the least amount of magnetic inductance and interaction between hot neutral and ground conductors. Each OCC conductor is covered in Pure Virgin Cross-linked polyethylene, with an excellent stable dielectric constant over all frequencies, and an unmatched natural quality when combined with OCC conductors in audio applications.

All frontRow powerChord OCC conductors terminate to the new Audience Rhodium plated copper wall plugs and 15 amp or 20 amp IECs. These special termination connectors insure the highest quality and most secure connections from the AC source to your components, and provide the highest signal transfer for both voltage and current. All new frontRow powerChord grounding OFC shielding shunts unwanted noise and distortion caused by RF and EMI efficiently away from signal conductors  to provide uncompressed ultra quiet backgrounds.

At the end of the day, when you turn on your system, and you want to go where it takes you, make sure you are in the frontRow.

• Conductors: - 6 each/38 strand 99.9999% OHNO Continuous Cast Copper
• Dielectric: - Virgin Cross-linked Polyethylene XLPE
• Geometry: - frontRow
• Wire Current Capacity: - 34.7 amps
• Shielding: - Oxygen Free Copper - Hot Shunt to Ground
• Connectors: - Audience Rhodium Plated Wall Plug and 15amp or 20amp IEC
• Build Time: - 4.5 hours
• Post Production: - MORRE Deep Cryo II - EHVP
• Burn In: 3 to 4 Days