Featuring The Audiophile Lending Library

ARC Master Cartridge Alignment Gauge

by Graham Engineering

$200.00
OR
Finally precision cartridge alignmant for all major brand tonearms is now easy.

With the Arc Master you always know your stylus is tracking the proper arc for your tonearm's effective legnth. The Arc Master arcs are laser etched via a precision computer controlled system. This system cuts the arc roughly the depth of a record groove so that the stylus will fall into the groove when it is tracking the arc, simple!

The easy way to align any virtually any tonearm and cartridge. If the stylus is in the groove you are tracking the perfect line for the effective length of your tonearm. Stop guessing that your turntable is set up properly, know that it is right from the first groove to the last groove on an LP.

There has been over a year of research and development of this alignment tool. Precise effective lengths for all the tonearms was provided by each tonearm Manufacturer for a perfect alignment process. Greg Beron worked with a Senior Mathematician employed by the Pentagon for 32 years to determine the proper arc for each arm. These arcs were programmed into his computer and then transferred to a precision laser cutting machine to produce the ARC MASTER. This process will guarantee perfect precision etching of each arc on the Arc Master.

The Arc Master is the first choice of professionals and amatures alike.

The above information is from the manufacturer.
Have a question? Connect with our Audio Gurus at 800-328-9973 or 215-862-4870 or Send email or use Contact form. You can also take advantage of our system matching expertise with a Free System Consultation.

MORE Graham Engineering PRODUCTS

Phantom Elite Tonearm

Phantom Elite Tonearm

From

$12,000.00

Graham Engineering

Phantom III Tonearm

Phantom III Tonearm

From

$7,000.00

Graham Engineering

Need Help?