Perfect Ground Cable

Perfect Ground is our high-performance Ground Cable. Composed of 4x 14AWG High Purity Oxygen-Free Copper conductors, Perfect Ground offers an ideal grounding for every component. The massive 8AWG aggregate utilizing multiple conductors delivers a very powerful ground potential. The Wall-Plug is upgraded with Bincho-Tan, a form of Ubame oak charcoal from Japan which absorbs EMI and RF as well as emitting negative ions. This results in a drastic overall reduction in noise and a huge improvement in soundstaging, imaging and purity of tone.

A standard Perfect Ground is 6Ft long and terminated with an RCA at the component end and a Bincho-Tan enabled wall plug at the other. Custom lengths available at an upcharge; XLR, Spade or 3.5mm available as special-order options.

Specifications:

• Conductors: Multi-Strand High Purity Oxygen Free Copper 
• Conductor Gauge: 14 AWG X 4
• Insulation: PVC
• AC Connector: Leviton, Schuko or UK1363
• Connector: RCA, Clip, Spade, XLR or 3.5mm
• Extensive use of natural minerals: Binchō-tan

Ground Cable

Your components are grounded. Your AC wall outlet is grounded. Why aren’t your circuit boards? We’ve found that most audio circuit boards are not connected to an AC ground leading to less than optimal sonic results. Our Ground Cables improve the performance of your system by providing these boards with a direct path to ground. Each Ground Cable comes pre-terminated with one of several connections for the component end (RCA, XLR, Spade, Pin) and an AC Wall Plug at the other end. Ground Cables are exclusively wired from ground to ground, no other pins or connections are wired. Simply connect the Ground Cable to an unused input on the component then plug the cable directly into the wall. The results are stunning with a massive drop in noise and a huge increase in clarity. Ground Cables are available in a variety of connections to suit any component, ground them all and hear deeper into every recording.

“High frequencies were considerably cleaner, sweeter and more realistic. Mids and bass lines gained complexity and nuance that had a greater ring of truth. I achieved better resolution, cleaner dynamic range, more accurate tonal character and better treble.” 6moons, July 2017

For optimum results, we recommend using Ground Cables on all components, focusing first on source components. We do not recommend connecting Ground Cables to power conditioners as the internal grounding schemes within these might interfere, however, a power strip or a distribution bar without filtration may be used to simplify connections. Our Ground Cables will have an immediate effect in the system, however, like all audio cables their ultimate performance will be achieved after 25-50hrs of play time.