Featuring The Audiophile Lending Library

A2+ Wireless Speakers (Pair)

by Audioengine

MAP Pricing (Guaranteed lowest advertised price)

Frequent Flyer Program does not apply.

Starting from :

$269.00
$269.00

* Required Fields

Price with selection:

$269.00

A2+ Wireless Speaker System

A2+ Wireless Speakers provide clear, full stereo sound and can easily connect to all your music in seconds. Great for your desktop or smaller rooms. The perfect mini music system with wireless that works.


General specifications

Type  2.0 powered (active) multimedia desktop speaker system

Amplifier type  Dual class AB monolithic

Power output  60W peak power total (15W RMS / 30W peak per channel), AES

Drivers  2.75″ aramid fiber woofers, 3/4” silk dome tweeters

Inputs  3.5mm stereo mini-jack, RCA, USB, Bluetooth

Outputs  RCA variable line-out

Mains voltages  100-240V 50/60Hz auto-switching

SNR  >95dB (typical A-weighted)

THD+N  <0.05% at all power settings

Crosstalk  <50dB

Freq. response  65Hz-22kHz ±2.0dB

Input impedance  10K ohms unbalanced

Protection  Output current limiting, thermal over-temperature, power on/off transient protection

USB specifications

Connector type  Micro USB

USB device class  type 1.1 and above

Internal D/A converter  CSR8670

Input bit depth  up to 16 bits native

Input sample rate  up to 48KHz native


Bluetooth specifications

Internal BT receiver  CSR8670

Input bit depth  16 bits

Bluetooth receiver type  Bluetooth 5.0 audio

Supported codecs  aptX low latency, aptX, AAC, SBC

Wireless operation range  Up to 100ft (30m) typical

Input data rate  Determined by Bluetooth

Wireless latency  ~30 milliseconds (ms)


Weights and measures

Dimensions (each)  6”(H) x 4”(W) x 5.25”(D)

Weight (LEFT speaker)  1.6Kg/3.55lbs

Weight (RIGHT speaker)  1.4Kg/3.15lbs

Shipping weight  4.6kg/10lbs per pair

Shipping box dims  10.5” (H) x 15” (L) x 7” (W)


Materials and construction

18mm thick MDF cabinets
3/4
(20mm) silk dome tweeters with neodymium magnets
2.75
aramid fiber woofers with advanced voice coils


Finish options

Satin Black Paint
Hi-Gloss White Paint
Hi-Gloss Red Paint


Environmental requirements

Operating temperature: 32 degrees F to 95 degrees F
Non-operating temperature: -4 degrees F to 113 degrees F
Relative humidity: 5% to 95% non-condensing


Custom components

Audioengine designs and manufactures our own tweeters, woofers, and other critical components. In other words, these are not “box built” speakers with off-the-shelf parts but custom-designed to our specifications. What we do not fabricate directly in our factory we have made to our designs (parts such as transformers, magnets, and wiring harnesses, for example). The cabinets, drivers, bass port designs, amplifiers, and crossovers are all painstakingly tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires much less power than passive speakers and a separate integrated amplifier or similar A/V components.


Efficient integrated design

The speaker cabinets, drivers, innovative bass port designs, amplifiers, and passive crossovers are all critically tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components. We build all this goodness into the left speaker cabinet to make it super-easy to connect your smartphone, tablet, computer, TV, network player or any other audio product.


High-quality Bluetooth audio

The Bluetooth built into the A2+ Wireless speakers features aptX coding which is an advanced Bluetooth audio codec with very impressive sound. And even if your phone or tablet does not have aptX, the A2+ Wireless Bluetooth solution is backwards-compatible with SBC and AAC codecs, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music. High-fidelity Bluetooth aptX that really works and sounds great.

Extended wireless range. Most Bluetooth implementations have very limited range, typically within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that has up to 3 times the range of standard Bluetooth for multi-room use, with no degradation in audio quality.


Amplifier design

The amplifiers in powered Audioengine speakers are located in the left speaker and are a conservatively-rated class A/B analog monoblock design. This is a more traditional speaker/amplifier configuration which provides excellent quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection.


Driver designs

Audioengine uses audiophile-quality, ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are aramid fiber woven glass composite with rubber surrounds. Aramid fiber is obviously very strong, which means the woofer retains its shape when being driven at high levels.


Sheilding

Both of A2+ Wireless speaker drivers are directly magnetically-shielded.

 

The above information is from the manufacturer.
Have a question? Connect with our Audio Gurus at 800-328-9973 or 215-862-4870 or Send email or use Contact form. You can also take advantage of our system matching expertise with a Free System Consultation.

Audioengine A2+ Wireless Speakers (Pair) - Satin Black

More Views

  • Audioengine A2+ Wireless Speakers (Pair) - High Gloss White
  • Audioengine A2+ Wireless Speakers (Pair) - Satin Black
  • Audioengine A2+ Wireless Speakers (Pair) - Satin Black
  • Audioengine A2+ Wireless Speakers - Accessories
  • Audioengine A2+ Wireless Speakers (Pair) - Satin Black
  • Audioengine A2+ Wireless Speakers (Pair) - High Gloss White
  • Audioengine A2+ Wireless Speakers (Pair) - High Gloss White
  • Audioengine A2+ Wireless Speakers (Pair) - High Gloss Red
  • Audioengine A2+ Wireless Speakers (Pair) - High Gloss Red

MORE Audioengine PRODUCTS

HD3 Wireless Speakers (Pair)

HD3 Wireless Speakers (Pair)

From

$349.00

Audioengine

S8 Powered Subwoofer

S8 Powered Subwoofer

From

$349.00

Audioengine

A5+ Classic Speakers (Pair)

A5+ Classic Speakers (Pair)

From

$399.00

Audioengine

HD6 Wireless Speakers (Pair)

HD6 Wireless Speakers (Pair)

From

$699.00

Audioengine

P4 Passive Speakers (Pair)

P4 Passive Speakers (Pair)

From

$249.00

Audioengine

HDP6 Passive Speakers (Pair)

HDP6 Passive Speakers (Pair)

From

$399.00

Audioengine

B2 Wireless Speaker

B2 Wireless Speaker

From

$225.00

Audioengine

B1 Bluetooth Music Receiver

B1 Bluetooth Music Receiver

$189.00

Audioengine

D1 Premium 24-Bit DAC

D1 Premium 24-Bit DAC

$169.00

Audioengine

D3 24-Bit DAC/Headphone Amp

D3 24-Bit DAC/Headphone Amp

From

$149.00

Audioengine

W3 Wireless Audio Adapter

W3 Wireless Audio Adapter

$149.00

Audioengine

W3R Receiver Kit

W3R Receiver Kit

$89.00

Audioengine

D2 24-Bit Wireless DAC

D2 24-Bit Wireless DAC

$399.00

Audioengine

D2R 24-Bit Wireless DAC

D2R 24-Bit Wireless DAC

$275.00

Audioengine

N22 Desktop Audio Amplifier

N22 Desktop Audio Amplifier

From

$199.00

Audioengine

A5+ Wireless Speakers (Pair)

A5+ Wireless Speakers (Pair)

From

$499.00

Audioengine

Need Help?