Click to enlarge
Audioquest's Sub-3 Subwoofer with 36vDBS
Subwoofer Cables by Audioquest
Our pricing for this product is the "MAP Pricing." This means that the prices shown here are the "minimum advertised prices" permitted by the manufacturer. Because these are already the lowest prices possible, the additional incentives usually available under "Frequent Flyer" program do not apply to this item.
SUB-3 uses three solid 6.1% Silver conductors inside PE Air Tubes. Solid conductors eliminate strand-interaction distortion. PE Air Tubes minimize information smearing caused by any solid or foam insulation. The 36V electrostatic field on the PE tubes almost eliminates remaining insulation induced distortion. Three conductors insure optimum performance single-ended (RCA plugs) or balanced (XLR plugs). A 100% coverage shield insures noise-free performance. Silver-plated plugs are welded to Sub-3 using 8,000 amperes.
Silver-Plated Copper (PSC) always provides superior performance for video and digital audio. Unfortunately, when used for full range analog audio, the discontinuity of plating silver over copper causes high frequencies to sound edgy and harsh. However, when used only for subwoofer frequencies, SPC's "artificial edge" actually enhances the articulation and intelligibility of low frequency information. Do not use Sub-3 as a full range audio cable.
DIRECTIONS: If you hear noticeable hum in your system after connecting your subwoofer, please attach Sub-3's little extra tails. Some equipment has a ground (GND) connection on the back-panel, if not, attach the little spade lugs to any screw on the equipment chassis of both the source and the subwoofer. Standard 12V batteries in the DBS pack will last several years. A test button and LED allow for the occasional battery check.