Click to enlarge
Phono 2Ci MKII Balanced Phono Preamp
Phono Amps by
DOES NOT INCLUDE POWER CORD
This preamplifier has many unique features such as:
Automatic adjustment with MC-cartridges connected to the balanced-current-amplifier XLR input
Genuine fully balanced (symmetrical) circuit design in the entire signal path - the PHONO 2CI is a highly precise phonostage for MM and MC pickups. It is an excellent choice for all music lovers who would like to play their records on the highest level.
No op amps in the signal path - fully discrete (single transistors) Single Ended Class A technology.
Passive RIAA filters
No golobal overall feedback - the amplifier section runs without golobal overall feedback. In this way, dynamic distortions are drastically reduced. Short signal paths by the use of only one amplifier stage per output stage.
49db - 68db / 0,4-12mVrms 1kHz, 1Vrms out XLR
47-kOhm, switchable to 1-kOhm and 100-Ohm
47pF internal, switchable +47pF, +100pF, +220pF, +470pF
55db - 75db (suits for cartridges from 0,10mV to over 3,5mV)
10-Ohm,The sensivity of the XLR Current-Amplification-Input is depending on Voltage and Impedance of the Moving Coil Cartridge. The CI-Input fits to a wide range of Mc´s, including High-Output MC´s as well as Ultra-Ultra Low-Output MC´s.
RIAA with Neumann time constant +/- 0,25 dB (50kHz roll-off)
-9dB / 10 Hz, -18 dB / 5 Hz, -48 dB / 2 Hz
THD + Noise:
1V out-XLR 0.009% at min. 0.04% at max. MM-RCA-In
1V out-XLR 0.019% at min. 0.09% at max. MC-RCA-In
Signal-Noise Ratio (S/N) IHF-A:
1V-Out-XLR-MM-RCA-In 76dB Flat, 84dBA at min./ 63dB Flat, 71dBA at max.*
1V-Out-XLR-MC-RCA-In 69dB Flat, 78dBA at min./ 57dB Flat, 65dBA at max*
Power consumption 5 W
External dimensions (w / h / d): 17 1/8" x 2 3/8" x 11 1/2" (435 x 59 x 290 mm)
Weight: 6 1/4 lbs. (2.8 kg)