Click to enlarge
Black Ravioli's Big Foot 2 (Single)
Feet by Black Ravioli
The Big Foot range of products are the premium products in the Black Ravioli range. They have been have been available in the UK since early 2010 and have proven extremely successful at extracting the best performance across a wide range of systems, irrespective of the component unit cost.
The Big Foot units are available in one, two or three pad configuration and incorporate a corian plate to further optimize the operation of the groups of pads.
The Big Foot range has now been fully upgraded to second generation specification as it takes account of the separation improvements that we have made in the Big Pad. It should be noted that with these improvements incorporated the Big Foot range is now handed and should always be installed with the Black Ravioli logo the correct way up to ensure the pads are in the right orientation.
Typical use will be under the main source, control and power equipment and suggested options are presented in the Black Ravioli set-up guide.
The Big Pads are once again pre loaded for better efficiency and have nominally 2.5mm of additional compression available to allow for settling of the equipment. The additional settling range makes them most suitable for use where the weight distribution of a piece of equipment is biased. For this reason, the two and three pads options are very successful with large power amplifiers of both valve and solid state orientation.
The nominal dimensions of the Big Foot 1 are 52mm x 52mm x 30mm (27.5mm fully compressed).
The nominal dimensions of the Big Foot 2 are 52mm x 110mm x 30mm (27.5mm fully compressed).
The nominal dimensions of the Big Foot 3 are 52mm x 168mm x 30mm (27.5mm fully compressed).