Shop by Categories

select

Shop by Brand

select

AVS 5.1 Surround System
Click to enlarge

AVS 5.1 Surround System

Speakers by

Manufacturer's Description:

The AVS 5.1 system is the latest Epos Home Theatre package, designed to meet the exacting demands of the discerning listener. This elegant piano gloss black speaker package provides sound quality to match its stunning looks. Constructed in solid MDF cabinets, these sculptured cabinets are painted and polished to a high-gloss finish which is popular in many homes today.

Satellites
The satellite speakers are based on two new drivers from Epos. A metal dome tweeter, similar to the one used in the new ELS8 and a long throw 4” paper-pulp cone mid-bass driver mounted in a pressed steel chassis. These drivers are magnetically shielded. With two forward firing ports they are well suited to being mounted close to a rear wall if required. A multiple order crossover uses high-grade close-tolerance components to maintain high sound quality expected from an Epos speaker. They are voiced for Home Theatre, but are equally suited to music reproduction. A matching elegant AVS metal stand is also available which positions the satellites above furniture to give the best results.

Centre Channel
The centre channel speaker is based on the same drive units used in the satellites. Using two mid-bass drives and one tweeter and forward firing tuning ports, they are a perfect match for any system and are a small enough to fit in most TV equipment stands.

Sub woofer
An attractive powered Sub woofer is supplied in the package. It uses a specially developed 8” paper cone long-throw woofer, with 2” voice coil. It’s powered by a custom made 100 Watt analogue amplifier with adjustments for volume, frequency and phase. The woofer is forward firing with a removable cloth grille and large down-firing port. Therefore, it must be mounted on 2” (50mm) high feet, to allow the port to breath. It is supplied with a simple remote control for adjusting the volume and powering on and off. It is cosmetically matched to the centre channel and satellite in high gloss black.

Technical Specification
FRONT & REAR SATELLITES
Type-  2 way bass reflex
Power-  100 Watts
Impedance-  4 ohms nominal
Sensitivity-  86dB 2.83V/ 1m
Frequency response-  70Hz-19 kHz +/- 3dB
Woofer-  115 mm cone woven Kevlar
Tweeter  -  25mm aluminium/magnesium alloy dome with neodymium magnet
Crossover-  Second order on woofer and tweeter at 2.5 kHz, with film capacitors in the tweeter section
Cabinet -  12mm MDF with internal bracing Finish High gloss black paint
Weight-  2.7 kg (5.9 lb)
Dimensions-  235 x 130 x 187 mm (9.25 x 5.12 x 7.36 ins) H x W x D
 
CENTRE CHANNEL
Type-  2 ½ way bass reflex
Power-  100 Watts
Impedance-  4 ohms nominal
Sensitivity-  84dB
Frequency response-  65Hz-19 kHz +/- 3dB
Woofer-  2 x 115 mm cone woven Kevlar
Tweeter-  25mm aluminium/magnesium alloy dome with neodymium magnet
Crossover-  Second order on woofer and tweeter at 2.5 kHz, with film capacitors in the tweeter section
Cabinet-  12mm MDF with internal bracing Finish High gloss black paint
Weight-  4.8 kg (10.5 lb)
Dimension-  130 x 385 x 167 mm (5.12 x 15.2 x 6.57 ins) H x W x D
System weight (gross)-  18.1 kg (39.8 kg) (4 satellites and 1 centre speaker in one carton with outer sleeve)
 
SUBWOOFER
Type-  Bass reflex with forward firing driver and down firing port
Internal amplifier-  100 Watts
Impedance-  4 ohms nominal
Sensitivity-  84dB
Bass response-  38 Hz (-6dB)
Woofer-  200mm (8”) with stiff paper pulp cone
Front Power Indication-  No light, power off. Green power on. Red standby.
Auto On/Off-  Yes, the unit will go into standby after approximately 15 minutes with no input signal

Inputs and outputs
Low level LFE-  Unfiltered
Line level-  Stereo IN and OUT
High Level-  Loudspeaker level IN and OUT
Controls-  Volume (also controllable by the remote control)

Variable low-pass filter 40-160Hz

Continuously variable phase control 0-180 degrees

Remote Control with functions, STANDBY/ON, Volume UP and DOWN
Finish-  High gloss black paint
Weight (gross)-  16.1 kg (35.4 lb) Packed in carton with outer sleeve
Mains Voltage-  110-120V AC 60Hz or 220-240V 50Hz (factory preset via AC VOLTAGE SELECTOR switch) Please check this is set correctly for your local mains supply
Dimension-  380 x 300 x 360 mm (15 x 11.8 x 14.2 ins) H x W x D

Measurement includes 50mm spikes
Weight-  12.6 kg (27.7 lb)


Pricing Information


NO LONGER AVAILABLE
Contact Us With Any Questions
Recommended items
Support
Metric Conversion
Contact Us
FAQ
Partner Websites
UsedCable.com
UltraSystem.com
Used components