Click to enlarge
Lyra's Titan i Mono
Cartridges by Lyra
Please choose New (no trade-in) or Upgrade (with trade-in) If you have a cartridge to trade, mention in the comments section of your order.
Top Tier trade-in means Atlas, Titan, Olympos & Parnassus.
2nd Tier trade-in means all other Lyra models.
The Titan is
the new flagship model from Lyra, and is a replacement for the discontinued Parnassus D.C.t. The Titan is also the most advanced cartridge that Lyra has ever
Compared to the D.C.t, the Titan is conceptually more sophisticated, offers a higher level of component design and quality, and delivers a
superior level of sonic performance in every possible way. The Titan's potential for detail retrieval, dynamics, perceived frequency extension and tracking
have been all been much improved. In addition to having the potential for a much higher level of performance, the Titan has also been designed for greater
ease of setup. In other words, the Titan makes it easier for more audiophiles to extract a greater amount of its performance potential.
design, the Titan takes the best aspects of the Parnassus D.C.t and Helikon, and introduces further advancements of its own.
As with all other
current Lyra cartridges, the only components that create the magnetic field of the Titan are two symmetrical disc magnets. The magnetic field is therefore
also symmetrical, and the field distortions created by conventional polepeces and offset magnets have been completely eliminated. The magnets are made of a
new neodymium compound that is the most powerful magnetic material in the world. The improvements to the magnetic field result in more accurate conversion of
mechanical vibrations into electrical signals; in other words, lower distortion. At the same time, this allows the coils and cantilever to move more freely,
leading to improved low level resolution and better tracking abilities, particularly at low vertical tracking forces.
The Titan's body is
machined from a single piece of titanium alloy, which has been curved and shaped in a manner calculated to minimize standing waves and internal reflections
and resonance. This attention to detail has also been extended to the interior body structures, which are too intricate to be formed by mechanical means. A
different process called electrical discharge machining was therefore employed, not only because of its ability to fashion complex shapes, but also because
unlike conventional machining, it is a non-contact process, and therefore does not create any mechanical stresses in the machined structures. The superior
rigidity afforded by the Titan's solid, intricate, low-resonance body construction helps create a clearly defined reference pivot for the cantilever, which
improves the conversion accuracy of mechanical vibrations into electrical signals. The rigid titanium body also creates an efficient path for the vibrations
from the stylus to be channeled away from the critical signal generator area and into the tonearm, where this energy can be dissipated effectively. The
titanium alloy itself is a different type from that used in the Parnassus DCt, and has been chosen specifically for its low-level of self-resonance and
advantageous sonic properties.
Although the Parnassus DCt was a semi-open design, the Titan is fully nude, with a body shape that has been
designed to minimize cavity resonance, and also minimize the presence of conductive materials in the vicinity of the magnetic gap and signal generator coils.
For similar reasons, the front magnet carrier of the Titan is both non-magnetic and non-conductive. This non-conductive, nude construction prevents the
formation of dynamically induced variable eddy currents that would otherwise interfere with the primary magnetic field and distort the signal generation
The Titan's stylus rides at the tip of a low-mass diamond block measuring 0.08 x 0.12 x 0.5mm. The stylus itself is a Lyra-designed
line-contact, with a major radius of 70 micrometers and a minor radius of 3 micrometers. We first designed a number of different stylus shapes based on
theory and calculation, and then subjected the candidates to exhaustive interactive testing. The result is a stylus that is extremely good at tracking and
detail retrieval, yet offers ultra-low levels of groove wear, has a very good signal-noise ratio, and reduces the audibility of groove damage.
Titan uses a compound structure cantilever which has been designed to increase the propagation velocity and self-dampening characteristics as much as
possible. Consisting of a solid boron core, an outer diamond layer, and an additional reinforcement metal jacket, the cantilever's combination of low mass,
high stiffness and low internal resonance reduces overshoot and ringing, thereby helping to minimize the audibility of groove damage and improving the
perceived signal-noise ratio, even on worn records.
The 5.5-ohm low-impedance signal coils are wound from high-purity copper over a
chemically-refined high-purity iron core, which has been gold-plated to reduce eddy currents and thereby minimize distortion. The impedance characteristics
remain flat far beyond the audible range, and the use of high-purity materials reduces both measured and audible distortions.
The free length of
the Titan's suspension wire is ultra-short. This creates a precisely defined reference pivot for the cantilever, and plays an important role in improving
the conversion accuracy of mechanical vibrations into electrical signals. The compound damper system utilizes completely new damper materials that provide
superior tracking, detail retrieval and minimal ringing.
The cantilever assembly of the Titan has been mounted directly to the titanium body.
Intermediate mounting methods such as polepieces or subcarriers have been completely eliminated. Both the cantilever and the insides of the body have been
shaped so that when the two components are joined to each other, a double-knife-edge system will be created, which will concentrate as much pressure as
possible on the joint area and thereby achieving a type of cold weld. This direct mounting system minimizes the number of mechanical joints between the
cantilever and tonearm, and maximizes mechanical energy transfer away from the stylus and generator area. The end result is far less reflected mechanical
energy, and therefore significantly reduced levels of distortion and resonance.
The signal output pins of the Titan are plated with rhodium, a
highly conductive yet tough material that, unlike gold, will stay intact and retain its superior conductivity, even over repeated cartridge installations.
The Titan has been designed for ease of use. The body incorporates threaded M2.6 holes to make it easier to install the mounting screws. The total
height of the Titan is just under 17.9mm, while the distance from the center of the mounting screws to the stylus tip is 3/8 inch (9.525mm). Henceforth, all
Lyra cartridges will be standardized with these height and mounting-screw-to-stylus dimensions.
Despite that the Titan is a fully nude cartridge,
the design of the stylus guard affords the stylus and cantilever full protection when the Titan is not being used and also during the installation process.
The slide-on design of the stylus guard makes it easy to use and minimizes risk to the cantilever when the guard is being installed.