Home / Analog / Phono Amps
Click to enlarge
Pro-Ject's Phono Box SE II
Phono Amps by Pro-Ject
Our pricing for this product is the "MAP Pricing." This means that the prices shown here are the "minimum advertised prices" permitted by the manufacturer. Because these are already the lowest prices possible, the additional incentives usually available under "Frequent Flyer" program do not apply to this item.
Manufacturer's Description:
The Pro-Ject Phono Box SE II is a high-performance solid state phono preamplifier and RIAA equalizer for use with any moving magnet or moving coil phono cartridge (seven selectable impedance settings for MC cartridges). Special low-noise component parts are used throughout the dual-mono circuit design for optimized fidelity and superior channel separation. Gain is rated at 60db (MC). Special attention has been paid to the shielding of the metal chassis to prevent any distortions created from vibration or electromagnetic interference. A subsonic filter provides 24db/octave of attenuation at 18Hz, effectively eliminating low frequency noise and rumble. Gold plated RCA jacks and outboard power supply are included.
SPECIFICATIONS
- Input Impedance (MM): 120, 220, 340, and 440pF / 47K ohm
- Input Impedance (MC): 17, 18, 20, 22, 69, 100 and 220 ohms / 120 pF
- Gain (MM): 40dB
- Output Voltage MM: 300mV / 1kHz at 3mV/1kHz at MM input
- Gain (MC): 60dB
- Output Voltage MC: 300mV / 1kHz at 0.3mV/1kHz at MC input
- Max. Output: 9.5V (1kHz)
- Signal-to-Noise Ratio MM: > -95dB (100dB – A weighted)
- Signal-to-Noise Ratio MC: > -75dB (80dB – A weighted)
- THD (MM): <0.03%
- THD (MC): <0.1%
- RIAA EQ Curve Accuracy: 20Hz - 20kHz > 0.3dB
- Subsonic Filter: 18Hz with 24dB/octave
- Power Supply: 16V/1000mA AC
- Power Consumption: 16V/180mA AC
- Dimensions: 4.1”w x 2.9”h x 6.3”d in.
- Weight: 2.4 lbs. (without power supply)
- Finish: Black or Silver