Home / Analog / Turntables
Click to enlarge
Pro-Ject's Debut III USB
Turntables by Pro-Ject
Our pricing for this product is the "MAP Pricing." This means that the prices shown here are the "minimum advertised prices" permitted by the manufacturer. Because these are already the lowest prices possible, the additional incentives usually available under "Frequent Flyer" program do not apply to this item.
Manufacturer's Description:
Debut III Phono USB additionally offers a phono preamp and premium A/D-conversion to digitalise vinyl music for transfer to PC / Mac according USB 1.1.
Manual turntable with built-in phono preamp and premium A/D conversion and USB output
Turntable
• Belt drive design with low noise AC motor Type Select 3
• Plinth out of MDF in matt black or with glossy black, glossy white, silver and red surface
• 1,3 kg balanced steel platter with felt mat
• Bearing Block 3: Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
• Motor decoupled to reduce vibration
• Special, resonance damping feets
Tonearm 8.6 D
• 8.6" tone-arm with aluminum headshell made aout of one piece
• Inverted tonearm bearing comprises inverted hardened stainlesssteel points and sapphire thrust-pads
• Single-screw fi xing of armtube allows rotation for easy adjustment of needle azimuth despite fi xed headshell
• Silicon damped tone-armlift
Cartridge
• Ortofon OM5e
Technical data
|
Pro-Ject Debut III/Phono USB
|
| Fitted cartridge |
Ortofon OM 5E |
| Nominal speeds |
33 / 45 / 78 r.p.m. (78 optional) |
| Internal phono pre-amplifier |
yes |
| Dust cover |
yes |
| RCA phono sockets |
yes |
| Tonearm |
Pro-Ject 8.6 |
| Effective tonearm length |
8,6 " (218,5mm) |
| Effective tonearm mass |
9,5g |
| Overhang |
18,5mm |
| Supplied counterweight |
cartridge weight 3 - 5,5g |
| Optional counterweights |
cartridge weights 1,5 - 3g, 6 - 9g |
| Downforce range |
10 - 30mN |
| Speed variance |
±0,8 % |
| Wow and flutter |
±0,12 % |
| Signal to noise |
-65dB |
| Platter weight/diameter |
1,3kg/280mm |
| Power supply type |
Mains-fed outboard power supply |
|
220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Output voltage |
16V/500mA AC |
| Power consumption |
2W |
| Depth (lid open) |
400mm |
| Height (lid open) |
370mm |
| Dimensions (lid open) |
415 x 365 x 405mm |
| Dimensions (lid closed) |
415 x 118 x 320mm |
| Weight |
6kg |
| Dimensions (W x H x D) |
|
|
|
| Technical data |
phono pre-amplifier / A/D converter |
| Output voltage |
160mV/1kHz at 4mV/1kHz input |
| Input impedance |
47kohms/100pF |
| Output voltage |
200mV/1kHz |
| Noise floor |
-88dB |
| RIAA-equalisation curve accuracy |
20Hz - 20kHz / max. 0,5dB |
| Internal A/D converter with USB out |
yes |
| USB-output |
digital serial data protocol USB 1.1 |
| Operating systems |
Windows®, MacOS® and Linux® |